60A 0.01A Digital Clamp Tester , 400A AC DC Clamp On Amp Meter

CAT III 600V GB4793.1-1995 Infrared Themometer For Digital Clamp Meter

Safety Instructions

This instrument strictly follow GB/T 13978-92 Generic specification for Digital Clamp meter, In accordance with GB4793.1-1995(IEC-61010-1, IEC-61010-2-032)Electronic measuring instruments safety requirements,Belong to the two class of pollution,Voltage standard CAT III 600V

Please follow the safety instructions, ensure the safety of the use of the instrument.

use and protect the item in right condition, the instrument will in satisfactory service.

Use

1.2.1 Use the correct function and range.
1.2.2 Do not exceed the scope of protection of the range of the indicating value measurement. Do not exceed the scope of protection of the range of the indicating value measurement
1.2.3 When measuring circuit, do not touch the test lead tip (metal parts).
1.2.4 In the measurement, if the measured voltage is higher than 60V DC or 30V AC (RMS), attention should be paid to keep your fingers always after the test finger protection device.
1.2.5 If the voltage between the measuring end and the earth more than AC 600V, don’t measure the voltage.
1.2.6 Before turning the switch changes the measurement function, should be removed test test lead from the circuit
1.2.7Don't live line measurement of resistance, capacitance, diode and continuity test
1.2.8Under the test range off current, resistance, capacitance, diode and continuity test, it should be taken to avoid the instrument connected voltage source.
1.2.9 Capacitor is fully discharge, don't test capacitance
1.2.10 Do not use this instrument in the gas, steam or dust
1.2.11If you notice any abnormal or faulty instruments, should stop using
1.2.12 unless the instrument bottom shell and the battery cover is fastened in situ; it should not use the instrument.
1.2.13Do not store or use the instrument in direct sunlight, high temperature, high humidity conditions.

Description

- The instrument is an professional measuring instrument with liquid crystal display and a back light source. The user readings in easily. Single hand operation with overload protection and low battery indicator. For professional, factory, school, lovers or family use, is an ideal Multi-function instrument.
- Used for AC DC voltage,AC current, frequency, resistance, capacitance measurement and the on-off circuit, measurement, temperature measurement .
- Automatic range
- Data keep
- Auto power off
- Relative measurement

Technical indicators

Environment temperature:23±5℃ Relative humidity:<75%

3.2.1 AC Current

-Min input current:0.02A AC

- Max input:400A AC

- Frequency:45Hz ~65Hz

- When ac current is measured, the meter automatically opens an internal low-pass filter to filter out high-frequency current.

3.2.2 DC voltage

- Min/ input voltage:0.5VV DC

- Input impedance:10MW

- Maximum/ input voltage:600V AC (Effective value)OR 600V DC

3.2.4 AC voltage

- Min/ input voltage:1.0V DC

-Input impedance:10MW

- Maximum/ input voltage:600V AC (Effective value)or 600V DC

- Frequency range:45Hz ~65Hz

3.2.5 Frequency

3.2.5.1 Through the V file:

- Range:40Hz ~ 1000Hz

- Input range:≥ 0.2A AC(Effective value)